| Beechcraft Textron Aviation |
50 (L-23A), B50 (L-23B), C50, D50 (L-23E), D50A, D50B, D50C, D50E, D50E-5990, E50 (L-23D, RL-23D), F50, G50, H50, J50 |
SA02002CH |
CD14060K14 |
Replaces the OE Janitrol Aero S50 (83A28) heating system. Improved fuel consumption vs. OE heater. Includes mounting hardware, components and wiring | Download |
| Beechcraft Textron Aviation |
95, B95, D95A, E95, 95-55, 95-A55, 95-B55, 95-B55A S/N TC-1 thru TC-1657, 95-B55B (T-42A), 95-C55, 95-C55A, D55, D55A, E55, E55A S/N TE-1 thru TE-958, TE-960 thru TE-967, 56TC S/N TG-1 thru TG-83, A56TC S/N TG-84 thru TG-94, 58 S/N TH-1 thru TH-436 |
SA01945CH |
CD14050K13 |
Replaces the OE Janitrol Aero S50 (83A28) heating system. Improved fuel consumption vs. OE heater. Includes mounting hardware, components and wiring. | Download |
| Beechcraft Textron Aviation |
95-B55 S/N TC-1658 and up, E55 S/N TE-959, TE-968 and up, 58 S/N TH-437 and up, G58 |
SA03334CH |
CD14193-1 |
Replacement for the Janitrol Aero 81D94-3, Janitrol Aero S50 83A28 (requires 29155 mounting hardware), C&D CD14192-1, C&D CD14050K13 and CD50000K33. Heater designed for use with the Nexus Heat/Air conditioning system but is also stand alone STC. Offers multiple improvements over previous Janitrol Aero and C&D systems. | Download |
| Beechcraft Textron Aviation |
58 S/N TH-1 thru TH-436 |
SA03334CH |
CD14193-1 + 29155 |
Same as CD14193-1 but includes mounting hardware for S50 replacement. | Download |
| Beechcraft Textron Aviation |
G58 |
SA02816CH |
CD50000K33 |
Replacement for Janitrol Aero 81D94-3 heater on the G58 exclusively. Includes Fuel pump, Combustion air blower, Air inlet assy and Sceet hose. | Download |
| Beechcraft Textron Aviation |
99, A99, B99 |
SA02653CH |
CD14190K31 |
New installation. Installed in the nose section, right side. Provides supplemental heat in addition to the Janitrol Aero S100. Includes all mounting hardware, components (including JetA fuel system) and wiring. Distribution plenum and ram air scoop optional. | Download |
| Cessna Textron Aviation |
170, 170A, 170B |
SA01949CH |
CD11214K12 |
Replaces OE, factory option, South Wind 979 system. Most 170's never had heater though cutouts are in floor. 25K BTU system. Includes most mounting hardware, all components and wiring. | Download |
| Cessna Textron Aviation |
190, 195, 195A, 195B |
SA00971CH |
CD11214K5 |
Replaces South Wind 979 and 940 systems. Installed in same location as original, under rear bench seat. BTU rating of 25K (vs. 15K of 979). Includes components and wiring. For more heat and better CG consider the CD12091K11 | Download |
| Cessna Textron Aviation |
190, 195, 195A, 195B |
SA01801CH |
CD12091K11 |
New installation (eliminates OE South Wind heater located under rear bench seat). Heater is 45K BTU. Sits aft of rear bulkhead for better CG and higher output. Includes all mounting hardware, components and wiring. | Download |
| Cessna Textron Aviation |
310, 310A S/N 35000 thru 35546 |
SA00971CH |
CD14010K3 |
Replaces South Wind 940 system. Increases BTU from 25K to 35K. Includes components and wiring | Download |
| DeHavilland Viking |
DHC-2 Mk. I, DHC-2 Mk. II, DHC-2 Mk. III |
SA03134CH |
CD12030K41 |
New installation for Beaver DHC-2. Heating system is 45K BTU and allows for quick removal and re-installation. Designed for amphibious use and includes Mounting hardware, components and wiring. Insullation kit and ducting kit are optional. | Download |
| Gulfstream American |
G-44, G-44A |
SA02707CH |
CD12015K26 |
New installation or replacement for South Wind 979 & 940 systems in the Grumman Wigeon. Installed in the tail section, left side. Includes mounting hardware, components and wiring. Ram air scoop and ducting kits are optional. | Download |
| Lake |
LA-4, LA-4A, LA-4P, LA-4-200 |
SA00971CH |
CD11215K6 |
Replaces South Wind 940 or Janitrol Aero 99C42. Same location and BTU rating of 25K. Includes mounting hardware, components and wiring.
Top drawing shows -A for fuel injected or -B for carbureted. | Download |
| Lake |
LA-4, LA-4A, LA-4P, LA-4-200, 250 |
SA01526CH |
CD12011K7 |
For new installations and used to replace Janitrol Aero system. 35K BTU vs. 25K in OE and CD11215K6. Includes mounting hardware, components and wiring. For Renegade - bonnet and dist plenum are needed, may purchase separately.
Top drawing separates components used for fuel injected from carbureted. | Download |
| Piper |
PA-23, PA-23-160, PA-23-235 (12VDC) Apache S/N 23-1 and up, 27-505 thru 27-622 |
SA01566CH |
CD11005K1 |
Replaces South Wind 979 and 940 systems. Increases BTU rating from 25K to 35K. Includes mounting hardware, components and wiring. | Download |
| Piper |
PA-23-250, PA-E23-250 (12VDC) Aztec w. Carbureted Engines S/N 27-1 thru 27-258, 27-365 thru 27-401, 27-403 thru 27-2297, 27-2299 thru 27-2330, 27-2332 thru 27-3049, 27-3051 thru 27-3153 |
SA01566CH |
CD11005K2(C) |
Replaces the OE South Wind 979 and 940 systems. Increases BTU from 15K/25K to 35K. Includes all mounting hardware, components and wiring. (C) indicates this installation is for use with carbureted engines. | Download |
| Piper |
PA-23-250, PA-E23-250 (12VDC) Aztec w. Fuel Injected Engines S/N 27-1 thru 27-258, 27-365 thru 27-401, 27-403 thru 27-2297, 27-2299 thru 27-2330, 27-2332 thru 27-3049, 27-3051 thru 27-3153 |
SA01566CH |
CD11005K2(F) |
Replaces South Wind 979 and 940 systems. Increases BTU from 15K/25K to 35K. Includes all mounting hardware, components and wiring. (F) indicates this installation is for use with fuel injected engines. | Download |
| Piper |
PA-E23-250, PA-23-250 (24VDC) Aztec S/N 27-259 thru 27-364, 27-402, 27-2298, 27-2331 |
SA01566CH |
CD11006K2 |
Replaces South Wind 979 and 940 systems. Increases BTU rating from 25K to 35K. Includes mounting hardware, components and wiring. | Download |
| Piper |
PA-30 S/N 30-2 thru 30-401 |
SA00971CH |
CD12006K4 |
Replaces South Wind 940 system. Increases BTU from 25K to 35K. Includes components and wiring | Download |
| Piper |
PA-31, PA-31-300, PA-31-325, PA31-350 |
SA01751CH |
CD12031K9 |
New installation for the rear of the Piper Navajo. STC includes all mounting hardware, components (including fuel system) and wiring. Heater is a 45K BTU. | Download |
| Piper |
PA-31-350 Modification Kit Only |
SA02973CH |
CD29151 |
Component only. Kit significantly increases heat output into cabin by allowing for additional airflow. Also replaces fuel regulator and filters incoming fuel. CD21253 Thermostat is also recommended for this aircraft for added longevity.
Note top drawing for two options on the Manifold (depending on OE setup.) | Download |
| Piper |
PA-31T, PA-31T1 |
SA02641CH |
CD11003K30 |
New installation. Installed in the tail section, left side, and sits upright. Provides heat in addition to the OE Janitrol Aero or CD12022-1 front heater. Includes all mounting hardware, components (including JetA fuel system) and wiring. | Download |
| Piper |
PA-34-200, PA-34-200T, PA-34-220T Fuel Pump Conversion Only |
SA02785CH |
CD52050 |
Component only. Replacement for OE heater fuel pump. Includes fuel line and cover. | Download |
| Sierra Hotel Aero |
Navion (L-17A), Navion A (L-17B, L-17C), Navion B, Navion D, Navion E, Navion F, Navion G, Navion H |
SA01772CH |
CD11007K8 |
Replacement for the South Wind 979 system installed in the engine compartment. Increases BTU from 15K to 25K. Does not have ventilation blower, air pushed into cabin via prop wash. Larger option with vent blower are the rear mounted 45K heaters (K23R or K27L kits). | Download |
| Sierra Hotel Aero |
12VDC Left Rear Installation Navion, Navion A, Navion B, Navion D, Navion E, Navion F, Navion G, Navion H |
SA02487CH |
CD12017K27L |
New installation (eliminates need for OE South Wind front heater.) 12V Replacement for CD11007K8 front heater. Located on left side of tail section. Increases BTU from 25K to 45K and allows for ventilation blower. Includes all mounting hardware, components and wiring. Optional distribution plenum available. | Download |
| Sierra Hotel Aero |
12VDC Right Rear Installation Navion, Navion A, Navion B, Navion D, Navion E, Navion F, Navion G, Navion H |
SA02487CH |
CD12008K23R |
New installation (eliminates need for OE South Wind front heater.) 12V Replacement for CD11007K8 front heater. Located on right side of tail section. Increases BTU from 25K to 45K and allows for ventilation blower. Includes all mounting hardware, components and wiring. Optional distribution plenum available. | Download |
| Sierra Hotel Aero |
24VDC Left Rear Installation Navion, Navion A, Navion B, Navion D, Navion E, Navion F, Navion G, Navion H |
SA02487CH |
CD12018K27L |
New installation (eliminates need for OE South Wind front heater.) 24V system is located on left side of tail section. BTU is 45K and allows for ventilation blower. Includes all mounting hardware, components and wiring. Optional distribution plenum available. | Download |
| Sierra Hotel Aero |
24VDC Right Rear Installation Navion, Navion A, Navion B, Navion D, Navion E, Navion F, Navion G, Navion H |
SA02487CH |
CD12016K23R |
New installation (eliminates need for OE South Wind front heater.) 24V system is located on right side of tail section. BTU is 45K and allows for ventilation blower. Includes all mounting hardware, components and wiring. Optional distribution plenum available. | Download |
| Sikorsky Aircraft |
S-55B S/N 55907 |
SR02562CH |
CD14190K28 |
New installation for Sikorsky rotorcraft. Installed in tail section and includes mounting hardware, components and wiring. Application is JetA. | Download |
| Twin Commander |
L-3085, 500, 500-A, 500-B, 500-S S/N 0131 and up, 500-U, 520, 560, 560-A, 560-E, 560-F, 680, 680-E, 680-F, 680-FL, 680-FL(P) |
SA01660CH |
CD12043K10 |
Replaces the OE Janitrol Aero S25 heater (C15C54) Increases BTU from 25K to 45K. Includes heater and Combustion Blower Assy. See top drawing for recommended optional components i.e. Vent blower assy, thermostat, fuel train etc.. | Download |
| Twin Commander |
680FL(P), 680F(P) |
SA02119CH |
CD14045K17 |
Replaces OE S-series Janitrol Aero system. Heater sits upright in tail of aircraft. | Download |
| Twin Commander |
680T |
SA02120CH |
CD14046K18 |
Replaces OE S-series Janitrol Aero system. Heater sits upright in tail of aircraft. JetA application. | Download |
| Wing Aircraft Emerald Enterprises |
D-1 |
SA02118CH |
CD11004K16 |
New installation. | Download |
